PT-30 Posi-Track Loader Series 3

At only 48 inches (1219 mm) wide, the Terex PT-30 compact track loader is sized to work in confined spaces yet productive enough to replace an entire crew of hand labor.

The 32.7 horsepower (24 kW) PT-30 uses patented Posi-Track™ undercarriage technology with suspension that maximizes traction and flotation. As a result, the machine’s 3,305 lb (1500 kg) operating weight is distributed down to only 2.8 pounds per square inch (19.2 kPa) of ground pressure.

A wide-range of performance-matched attachments makes it ideal for many jobs. The PT-30 may be equipped with general purpose 11-inch wide (280 mm) tracks or optional smooth Turf tracks for ultimate protection of finished surfaces.

  • Compact and maneuverable, ideal for productive work even in tight situations where access is limited.
  • Very low ground pressure allows work on soft or sensitive surfaces with minimal damage or impact.
  • Easy operation with pilot-operated joystick controls and comfortable operator station.
  • Standard auxiliary hydraulics and quick coupler attach easily to a wide range of performance-matched attachments

Specifications

OPERATING SPECIFICATIONS (STANDARD EQUIPMENT
Operating weight 3,305 lb (1500 kg)
Shipping weight 2,935 lb (1331 kg)
Ground pressure @ operating weight 2.8 psi (19.2 kPa)
Tipping load 1,600 lb (726 kg)
Operating capacity, 50% tipping load 800 lb (363 kg)
Operating capacity, 35% tipping load 560 lb (254 kg)
Travel speed, maximum 6 mph (9.4 kph)
ENGINE
Type Diesel, 3-cylinder, naturally-aspirated
Model Perkins 403D-15
Displacement 92 in3 (1.5 L)
Gross power rating @ 2800 rpm 32.7 hp (24.4 kW)
Torque, peak 70 ft-lb (96 Nm)
Cooling system Engine-driven fan and coolant/anti-freeze-filled radiator
Engine block heater Standard, AC plug-in type
Intake air cleaner Dual stage
Emission controls Meets all U.S. EPA Tier 3 standards
UNDERCARRIAGE
Track type - General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads.
- Single row of track drive lugs molded in.
- Turf Track with smooth tread available as an option.
Track width 11 in (279 mm)
Length of track on ground 55 in (1397 mm)
Ground contact area 1,183 in2 (0.78 m2)
Drive system Two hydrostatic direct drive sprockets controlled by a single joystick
Track drive sprocket Elevated with low friction, replaceable sprocket rollers.
Undercarriage suspension Two independent torsion axles per undercarriage.
Roller wheels 12 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings.
Roller wheel diameters 10 in (254 mm)
AUXILIARY HYDRAULIC SYSTEM
Pump capacity 10 gpm (37.9 lpm)
System pressure, max. 3,000 psi (20 670 kPa)
Controls Intermittent via joystick button or continuous via console switch, mode selectable via dash-mounted switch.
Couplers Push-to-connect quick couplers mounted on loader arms.
Pressure relief valve mounted to coupler block.
Cooling system High efficiency oil cooler beside engine radiator, not stacked
SERVICE REFILL CAPACITIE
Fuel tank 10 US gal (37.9 L)
Hydraulic tank 8 US gal (30.3 L)
Engine coolant/antifreeze 1.5 US gal (5.6 L)
Engine oil, including filter 4 quarts (3.8 L)
ELECTRICAL SYSTEM
Nominal charge 12 V
Battery 770 CCA
Charging system 65 amp alternator
Outlets 1-12 V port inside operator station
Wiring Pre-wired for all factory-available accessories
OPERATOR STATION
Seat Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2-in (51 mm) wide seat belt. An adjustable suspension seat is optional.
Loader control Right-hand pilot hydraulic joystick controls loader lift/lower and tilt, plus intermittent control of aux. hydraulic.
Drive control Left-hand pilot hydraulic joystick controls machine speed and direction.
Engine speed Hand-operated throttle lever.
Indicators/gauges - Engine oil low-pressure light
- Hydraulic oil high-temperature light
- Engine high-temperature light
- Low battery voltage light
- Hourmeter
- Fuel gauge
ROPS Meets SAE J1040 MAY94, ISO 3471:1994
FOPS Meets SAE J1043 SEPT87, ISO 3449:1992
Illumination 4 – Fixed forward-facing halogen lights
1 – Adjustable rear-facing halogen light
1 – Interior light
Convenience 12 V power port
Operator station options - Back-up alarm
- Beacon, rotating
- Cab enclosure with wiper
- Cab enclosure with heater, insulation, wiper
- Front door, (polycarbonate)
- Horn
- Seat belt, 3-inch (76 mm) wide
- Sound insulation
- Suspension seat, adjustable
- Engine tachometer
- Window, rear
- Windows, side, sliding

Dimensions : General Purpose Bucket

Dimensions : Pallet Fork Attachment

Downloads

Product Specification Sheet


Request a Quote