PT-100G Posi-Track Loader
- Categorized in: Terex Posi-Track Loaders
- A high-performance loader with premium features and an advanced undercarriage that includes multi-level suspension for exceptional traction and operator comfort. Optional 20 inch tracks with 11 percent more width offer even higher traction and flotation for working in very poor conditions.
- Two-speed hydrostatic drive system offers fast travel speed and high torque work speed. Selectable creep mode.
- Easy operation with pilot-operated joystick controls and comfortable operator station. Selectable ISO or “H” control pattern, and adjustable loader speed and sensitivity without sacrificing operating capacity or breakouts.
- Standard load sensing high-flow auxiliary hydraulics and high-capacity cooling system are ideal for demanding applications like brush cutting, mulching , cold planing and more.
| Operating Specifications (standard equipment) | |
|---|---|
| Operating weight | 11,462 lb (5,199 kg) |
| Shipping weight | 10,500 lb (4,763 kg) |
| Ground pressure@ operating weight optional 20 inch track |
4.5 psi (31 kPa) 4 psi (27.58 kPa) |
| Tipping load | 8,000 lb (3,629 kg) |
| Operating capacity, 50% tipping load | 4,000 lb (1,814 kg) |
| Operating capacity, 35% tipping load | 2,800 lb (1,270 kg) |
| Travel speed, low range | 0-6 mph (9.7 kph) |
| Travel speed, high range | 0-10 mph (16 kph) |
| Engine | |
|---|---|
| Type | Diesel, 4-cylinder, turbocharged, liquid cooled |
| Model | Perkins 1104C-44T |
| Displacement | 268 in3 (4.4 L) |
| Gross power rating @ 2300 rpm | 99.9 hp (74.5 kW) |
| Torque, peak | 310 ft-lb (420 Nm) |
| Cooling system | Engine-driven fan and coolant/anti-freeze-filled radiator |
| Engine block heater | Standard, AC plug-in type |
| Intake air cleaner | Dual stage |
| Emission controls | Meets all U.S. EPA Tier 3 standards |
| Undercarriage | |
|---|---|
| Track type | - General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. - Three rows of track drive lugs molded in. |
| Track width, standard Optional |
18 in (457 mm) 20 in (508 mm) |
| Length of track on ground | 71 in (1,803 mm) |
| Ground contact area Ground contact area, opt. track |
2,556 in2 (1.65 m2) 2,840 in2 (1.83 m2) |
| Drive system | Two-speed radial piston motors connected to planetary reduction final drives. |
| Track drive sprocket | Elevated with low friction, replaceable sprocket rollers. |
| Undercarriage suspension | Two independent torsion axles suspend each track frame, plus four independent |
| Roller wheels | 24 high-density polyurethane and rubber wheels per track. Wheel bearings protected by metal-faced seals. |
| Roller wheel diameters | Front & rear wheels – 15 in (381 mm) Middle wheels – 10 in (254 mm) |
| Auxiliary Hydraulic System | |
|---|---|
| Pump capacity, low flow Pump capacity, high flow |
Variable from 0-20 gpm (76 lpm). 45 gpm (170 lpm) adjustable from 30-45 gpm (114-170 lpm) |
| System pressure, max. Low Flow High Flow |
3,300 psi (22 753 kPa) 3,800 psi (25 166 kPa) |
| Controls | Intermittent via joystick button or continuous via console switch, mode selectable via dash-mounted switch. |
| Couplers | Push-to-connect quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block. |
| Cooling system | High efficiency side-by-side radiator and oil cooler. |
| Service Refill Capacities | |
|---|---|
| Fuel tank | 30 gal (114 L) |
| Hydraulic tank | 22 gal (86 L) |
| Engine coolant/antifreeze | 4.3 gal (12 L) |
| Engine oil, including filter | 9 quarts (8.5 L) |
| Electrical System | |
|---|---|
| Nominal charge | 12 V |
| Battery | 950 CCA |
| Charging system | 120 amp alternator |
| Outlets | 1-12 V port inside operator station |
| Wiring | Pre-wired for all factory-available accessories |
| Operator Station | |
|---|---|
| Cab | Sealed and pressurized cab. All weather cab is optional. |
| Seat | Adjustable suspension contour vinyl seat with built-in operator presence switch, lap bar and 2-inch (51 mm) wide seat belt. |
| Loader control | Right-hand pilot hydraulic joystick controls loader lift/ lower and tilt, plus intermittent control of auxiliary hydraulic. |
| Drive control | Left-hand pilot hydraulic joystick controls machine speed and direction. Selectable control pattern from ISO to H. |
| Indicators/gauges | - Fuel level - Tachometer - Hour meter - Coolant temp. gauge - Oil temp. gauge - Oil temp. warning light - Engine oil pressure gauge - Engine oil pressure warning - Battery low voltage indicator - Two-speed indicator |
| ROPS | Meets SAE J1040 APR 88, ISO 3471: 2008 |
| FOPS | Meets ISO 3449: 2005, Level 1 |
| Illumination | 2 – Fixed forward-facing halogen lights 2 – Rear-facing halogen lights 1 – Interior light |
| Convenience | 12 V power port |
